TSW210000010 / TSW210 Switch 8 GbE, 2 SFP

The Teltonika TSW210 is an industrial-grade Ethernet switch built to connect network devices using high-speed Gigabit Ethernet. It also includes SFP ports for long-distance fibre-optic connections. The switch is unmanaged, meaning it works away with no need for complicated setup or configuration.

It has 8 Ethernet ports that support speeds of 10, 100 and 1000 Mbps. These are RJ45 ports, so they work with Ethernet cables. There are also 2 SFP ports that allow the use of fibre-optic modules. This makes it a good choice for networks, manufacturing systems, solar power installations, infrastructure projects and other uses where reliable wired networking is important.

Key Specifications

• Part Number: TEL-TSW210000010
• Product Type: Industrial Ethernet Switch
• Switch Type: Unmanaged / Plug-and-Play
• Ethernet Ports: 8 × RJ45
• Ethernet Speed: 10/100/1000 Mbps
• SFP Ports: 2 × SFP
• Total Switching Bandwidth: 20 Gbps
• Packet Buffer: 128 KB
• MAC Address Table: 2K entries
• Jumbo Frames: Up to 9216 bytes
• Ethernet Standards: IEEE 802.3i, 802.3u 802.3ab 802.3x 802.3az
• Power Connector: 2-pin industrial DC socket
• Input Voltage: 7–57 VDC
• Maximum Power Consumption: 3.71 W
• Housing: aluminium
• Operating Temperature: -40°C to +75°C
• Protection Rating: IP30
• Dimensions: 132 × 44.2 × 95.1 mm
• Weight: 500 g
• Mounting: DIN rail, wall or flat surface
• Maximum Ethernet Cable Length: 100 m

Teltonika has updated its specification to 9–57 VDC for units. Always check the documentation or unit label to confirm the voltage range.

Main Features

• 8 Gigabit Ethernet ports that support up to 1000 Mbps
• 2 SFP ports for fibre-optic connectivity
• 20 Gbps bandwidth-blocking for fast data transfers
• Plug-and-play design – no software setup needed
• Works with 10/100/1000 Mbps devices
• Supports Auto MDI/MDIX for easier cable connections
• Rugged metal housing built for tough environments
• Operates in temperatures from -40°C to +75°C
• Can be mounted on DIN rails, walls, or flat surfaces
• Supports jumbo frames up to 9216 bytes
• Includes a 2K MAC address table
• Rated IP30 for protection against dust
• Uses a 2-pin industrial DC connector for power
• Ideal for long-range communication via SFP

What Is the Teltonika TSW210 Used For?

The TSW210 acts as a connection point for various Ethernet devices. You can plug computers, controllers, cameras, routers, and other network gear into its 8 Gigabit ports. The two SFP ports let you link the switch to fibre-optic infrastructure. This is especially useful when equipment is apart and needs a stable long-distance connection.

Technical Knowledge – Easy Explanation

What Is an Unmanaged Switch?

An unmanaged switch is simple to use. There is no need to configure settings through software. Just connect your devices and power the switch. The TSW210 automatically manages how data flows between devices. This makes it ideal when you want reliable network expansion without any complex setup.

What Does Gigabit Ethernet Mean?

Gigabit Ethernet means the network speed can reach up to 1000 Mbps. The TSW210 has 8 ports, which lets several compatible devices talk to each other quickly over a high-speed wired network.

What Are SFP Ports?

SFP ports allow the use of pluggable transceivers. These are often used with fibre-optic cables. This type of connection is best when you need to send data over distances. The TSW210 comes with 2 SFP ports specifically meant for links.

What Is Non-Blocking Bandwidth?

The TSW210 offers 20 Gbps of non-blocking bandwidth. This means it can handle all the data from its eight Gigabit ports simultaneously. No traffic slows down because the switch itself isn’t a bottleneck. It keeps data flowing even under heavy load.

Where Can You Use the Teltonika TSW210?

• Industrial Automation

The TSW210 connects computers, programmable logic controllers, and other Ethernet-enabled tools. It’s made for factory automation setups.

• Factories & Manufacturing

Thanks to its aluminium case, wide temperature tolerance, and DIN-rail mounting, the TSW210 fits inside control cabinets in factories.

• Solar Farms

This switch helps organize network connections between panels, inverters, monitoring systems, and computers. Teltonika shows it being used in farms.

• Industrial IoT

The TSW210 supports communication between many devices in an industrial Internet of Things environment.

• Infrastructure Networks

With 8 Gigabit ports and 2 SFP slots, it allows local devices to connect while linking to wider fibre-based networks.

• Remote & Large Installations

The SFP ports are great when devices are spread out over areas needing fibre-optic links.

Typical Devices You Can Connect

Depending on your needs, the TSW210 can connect:

• Industrial PCs
• Network routers
• Computers
• Printers
• IP phones
• Industrial controllers
• Ethernet-enabled machines
• Monitoring equipment
• Solar energy equipment
• Other network infrastructure gear

Teltonika’s installation guides show the TSW210 linked to devices like a PC, TRB140, IP phone, laptop, and printer.

Size & Weight

• Dimensions: 132 × 44.2 × 95.1 mm
• Weight: 500 g
• Housing: Full aluminium
• Mounting: Built-in DIN rail bracket plus options for wall and flat surface mounts

The compact aluminium build makes the TSW210 perfect for spaces like control cabinets or panel enclosures.

Why Choose Teltonika TSW210?

The Teltonika TSW210 is a choice when you need to connect many devices without making things overly complicated. Its 8 Gigabit Ethernet ports give wired performance. The 2 SFP ports add support for long-range fibre connections. The sturdy aluminium case, wide operating temperature, and DIN-rail compatibility make it strong enough for conditions.

For factories, farms, automation systems, and infrastructure projects, the TSW210 offers a clean, easy way to expand your wired network. It stays small, runs reliably, and installs quickly.