Teltonika RUTX11000300 Industrial Dual-SIM Wi-Fi Cellular Router

The Teltonika RUTX11 is a 4G LTE Cat 6 industrial router made for businesses that need fast, reliable, and secure internet connectivity at industrial, commercial or remote locations.

It has 4G LTE Cat 6 Dual SIM, dual-band Wi-Fi 5, Gigabit Ethernet, Bluetooth Low Energy, GNSS, and USB connectivity in an industrial case. The router offers speeds up to 300 Mbps with Carrier Aggregation, which makes it good for applications that need more data transfer.

The RUTX11000300 model is the RUTX11 version that comes with a UK power supply and supports the LTE bands listed by Teltonika for Europe, the Middle East, Africa, Australia, APAC, Brazil and Malaysia.

Key Features

• 4G LTE Cat 6 cellular connectivity
• Download speeds up to 300 Mbps with Carrier Aggregation
• Upload speeds up to 50 Mbps
• Dual SIM with automatic failover
• Backup WAN functionality
• band Wi-Fi 5 with 802.11ac Wave 2
• Up to 867 Mbps Wi-Fi transmission rate
• 4 × Gigabit Ethernet ports
• 1 × configurable WAN/LAN port and 3 × LAN ports
• Bluetooth 4.0 Low Energy
• Built-in GNSS for location and tracking applications
• USB 2.0 host port
• 1 × digital input and 1 × digital output
• Passive PoE input through LAN1
• 9–50 VDC power input
• Rugged aluminium housing
• DIN rail mounting option
• Supports VPN, firewall, VLAN, routing and other advanced networking functions
• Remote management through Teltonika RMS
• Runs on RutOS, Teltonika’s OpenWrt-based operating system

Key Specifications

• Brand Teltonika Networks
• Model RUTX11
• Product Code TEL-RUTX11200300
• Router Type Industrial Cellular Router
• Mobile Network 4G LTE Cat 6 / 3G
• LTE Download Speed Up to 300 Mbps
• LTE Upload Speed Up to 50 Mbps
• Carrier Aggregation Supported
• SIM 2 × Mini SIM (2FF)
• Wi-Fi 802.11b/g/n/ac Wave 2
• Wi-Fi Bands 2.4 GHz + 5 GHz
• Wi-Fi Speed Up to 867 Mbps
• Ethernet 4 × RJ45 Gigabit Ethernet
• WAN 1 × Gigabit WAN, configurable as LAN
• LAN 3 × Gigabit LAN
• Bluetooth  4.0 Low Energy
• GNSS GPS, GLONASS, BeiDou, Galileo, QZSS
• USB 1 × USB 2.0 Type-A
• Digital Input 1
• Digital Output 1 open collector
• Power Input 9–50 VDC
• Passive PoE Supported
• Housing Aluminium
• Dimensions 115 × 44.2 × 95.1 mm
• Weight Approx. 456 G
• Operating Temperature -40°C to +75°C
• Mounting: DIN rail / flat surface options

The specifications above are based on Teltonika Networks’ official RUTX11 product page, datasheet, and documentation.

4G LTE Cat 6 Connectivity

The RUTX11 uses 4G LTE Cat 6 technology and offers download speeds up to 300 Mbps through Carrier Aggregation.

This makes it suitable for applications where a basic 4G router may not offer bandwidth, like business networks, remote monitoring, video-based applications, and data-heavy industrial systems.

What is Carrier Aggregation?

Carrier Aggregation allows the router to combine compatible LTE frequency carriers to increase the available cellular bandwidth.

In terms the RUTX11 can use multiple LTE carriers together to provide higher mobile data performance when the network and operator support it.

Dual SIM for Connection Backup

The RUTX11 has two SIM slots and supports automatic SIM switching.

The router can be set up to switch between SIM cards based on conditions such as:

• Network connection failure
• Signal
• Data limit
• SMS limit
• Roaming
• Network availability
• Failed data connection

This is useful for remote installations where keeping network access is important and changing a SIM is not easy.

• Gigabit Ethernet Connectivity
• The RUTX11 has four Gigabit Ethernet ports.
• The setup includes:
• 1 × WAN port, which can be used as LAN
• 3 × LAN ports
• Support for 10/100/1000 Mbps Ethernet

Gigabit Ethernet allows for a wired connection between the router and devices like computers, industrial equipment, network switches, CCTV systems and other devices.

Dual-Band Wi-Fi 5

The RUTX11 offers dual-band Wi-Fi using 2.4 GHz and 5 GHz frequencies.

It supports 802.11ac Wave 2 with transmission rates up to 867 Mbps and features like MU-MIMO.

The router can work as an Access Point (AP) or Station (STA) depending on the network setup.

This lets you connect laptops, tablets, industrial terminals, smartphones, and other wireless devices without Wi-Fi equipment.

Bluetooth Low Energy

The RUTX11 includes Bluetooth 4.0 Low Energy (BLE).

Bluetooth can be useful for short-range communication with devices and sensors where supported by the application.

• GNSS / GPS Support
• The RUTX11 supports:
• GPS
• GLONASS
• BeiDou
• Galileo
• QZSS

GNSS information can be used for location tracking, geofencing, time synchronisation and connected asset applications. Teltonika also offers GNSS coordinates through its WebUI SMS, TAVL and RMS solutions.

• Industrial I/O Connectivity
• The RUTX11 provides:
• 1 × Digital Input
• 1 × Digital Output

The digital output uses an open-collector configuration and supports up to 30 V and 300 mA as per Teltonikas specifications.

These interfaces can be used to monitor equipment or trigger actions based on set conditions.

• USB Connectivity
• The router has a USB 2.0 Type-A port.
• Teltonika lists supported uses including:
• storage
• USB-to-serial connection
• USB flash drives
• External HDD
• Printers

Other compatible USB devices

This adds more flexibility when connecting external equipment to the router.

Advanced Networking Features

The RUTX11 is created for networking, not for basic home use.

It supports features like:

• Static routing
• Dynamic routing
• Policy-based routing
• BGP
• OSPF
• RIP
• EIGRP
• NHRP
• VLAN
• Firewall
• VPN
• QoS
• DHCP
• DDNS
• Network failover
• Load balancing

The router uses RutOS, an OpenWrt-based Linux operating system made for Teltonika networking products.

Remote Management

The RUTX11 works with Teltonika Remote Management System (RMS).

RMS helps businesses manage Teltonika devices remotely, which is especially helpful when routers are placed in many offices, industrial areas, vehicles or remote sites.

Remote firmware and configuration management can cut down the need for visits to deployed equipment.

Passive PoE Support

The RUTX11 can be powered through the LAN1 Ethernet port using passive PoE.

Teltonika says the passive PoE input ranges from 9–50 VDC. This can make installation easier if suitable power-over-Ethernet systems are available.

Note: Teltonika says this is PoE and is not compatible with IEEE 802.3af, 802.3at or 802.3bt PoE standards.

Where Can You Use the Teltonika RUTX11?

• Industrial Automation

The RUTX11 can provide wired networking for industrial machines, controllers, and automation systems.

It can be used where equipment needs internet access or remote network connectivity.

• Remote Monitoring

Connect equipment to a central office or cloud platform using 4G LTE.

This can be useful for monitoring machines, infrastructure and distributed equipment.

• Security Systems

The combination of 4G LTE, Gigabit Ethernet and Wi-Fi makes the RUTX11 suitable for connecting network devices at locations without a fixed internet connection.

• Business Backup Internet

The RUTX11 can offer a WAN connection and support WAN backup and Dual SIM failover, making it useful for a business connectivity plan.

• Transportation

With 4G LTE, Wi-Fi, GNSS, Bluetooth, and Ethernet, the router can be used in transportation and vehicle networking applications.

• Energy & Utilities

Remote utility equipment, monitoring systems and infrastructure can use connectivity to communicate with central systems.

• Commercial Locations

The RUTX11 can provide backup internet connectivity for remote retail stores, kiosks and commercial locations.

• Industrial IoT

The router can act as a communication point between devices, sensors, and cloud platforms.

• Remote Network Management

Businesses with equipment in places can use the router with RMS for remote monitoring and management.

Technical Knowledge – How Does the RUTX11 Work?

A simple way to think about the RUTX11 is as a communication hub.

For example:

Industrial Equipment → Ethernet → RUTX11 → 4G LTE → Cloud

Laptop / Wi-Fi Device → RUTX11 → 4G LTE → Internet

The router takes network traffic from devices and sends it through its available WAN connection.

The Dual SIM feature can provide another connection when conditions require switching, while the Ethernet WAN can also be used for backup or failover.

Weight

The Teltonika RUTX11 is approximately:

115 × 44.2 × 95.1 mm

The official Teltonika documentation says the weight is 456 g.

The router uses an aluminium case. Offers a DIN rail mounting option, which makes it good for professional cabinets, control panels and industrial installations.

RUTX11000300 – Regional Version

The product code TEL-RUTX11200300 seems to combine your internal sales prefix with the Teltonika order code RUTX11200300.

Teltonika lists RUTX11200300 as the RUTX11 EMEA/Australia/Brazil version with a UK PSU. Its LTE support includes bands B1, B3, B5, B7, B8, B20, B28, B32, B38, B40 and B41 along with 3G bands B1, B3, B5 and B8.

For a UAE/Dubai product listing, it is helpful to use the order code so customers can check regional network compatibility before buying.

Why Do Customers Need the Teltonika RUTX11?

The Teltonika RUTX11 is made for customers who need a network solution rather than a regular consumer 4G router.

It brings together 4G LTE Cat 6 Dual SIM, Gigabit Ethernet, dual-band Wi-Fi, Bluetooth LE, GNSS, USB, and industrial I/O in one device.

For companies that use machines, remote places, security cameras, transport setups, business areas, or Internet of Things setups, the RUTX11 offers many ways to link devices and stay connected to the internet.

It has a mix of LTE, high-speed network connections, two SIM cards that switch automatically, and advanced network management tools. This makes it a versatile choice for situations where strong internet is needed.

In words: Teltonika RUTX11 is a strong 4G LTE machine for businesses that want quick mobile internet, several network options, and a steady connection, for important uses.