EnGenius, 300Mbps Wireless N Router/AP/Repeater with Gigabit Switch, ESR9850 | NewEtrend.com
, , ,

EnGenius, 300Mbps Wireless N Router/AP/Repeater with Gigabit Switch, ESR9850

Availability:

3 in stock


Compare
  • Wireless 802.11n Technology – The most advanced wireless networking technology for the best range and speed.
  • Gigabit Ethernet Switch – Eliminates bottlenecks between wired and wireless devices and provides super-fast connectivity between wired devices.
  • SmartNAT – Ensures high performance when using P2P applications.
  • Multiple SSID – Allows media streaming to be segmented from regular data networking; Create a separate SSID for Guest Access.
  • Range Expander Feature – Extends the range of Wi-Fi networks.

ESR9850 is a 2T2R Wireless 11N Gigabit Router that delivers up to 6x faster speeds and 3x extended coverage than 802.11g devices. ESR9850 supports home network with superior throughput and performance and unparalleled wireless range. With easy to use on the WPS function, it helps users to connect to wireless device with just one push button.

There’s also a built-in 4-port full-duplex 10/100/1000/1000 Fast Switch to connect your wired-Ethernet devices together. The Router function ties it all together and lets your whole network shares a high-speed cable or DSL Internet connection.

Weight 0.59 lbs
Dimensions 170 × 111 × 26 in
brand

EnGenius

Brand: EnGenius

Software Features 
System System OS: Linux OS

System boot up time is <= 45 Sec

Utility Easy Setup Wizard
Router User Interface

 

Access method Web Based (HTTP 1.0 / 1.1)
BrowserCompatibility Microsoft Internet Explorer 5.5/6/7 , Safari Ver1.2,Firefox 2.0 or later
Status

 

System Status System Information System Up Time, Device Name, Wireless MAC, LAN MAC, Country, Current Time, Firmware Version, Management VLAN ID
Current IP Setting IP Address, Subnet Mack, Default Gateway, DHCP
Current Wireless Setting Operation mode, Wireless Mode, Channel/ Frequency, L2 Isolation, MSSID Setting

2.4Ghz TX/RX: packet counts & traffics in Kbytes

Client List List current associated clients.

Show only authorized and associated clients

– SSID

– MAC address

– Channel

– Security Type

– Mode (Infrastructure / Ad-hoc)

– Traffic in Kbytes

System Log displays a list of events that are triggered on the Ethernet and Wireless interface. This log can be referred to when an unknown error occurs on the system or when a report needs to be sent to the technical support department for debugging purposes

Wireless Functional List
Wireless Radio On/Off button Y Software button / Disable or Enable WiFi radio
Operation mode Y AP
Y Router
Y WDS AP
N WDS Bridge
N CB (2.5 NAT)
Y Repeater
Switch of 802.11 modes Y B/G/N
Channel setting Y Manual
Y Auto / Best Channel Selection
Transfer rate setting Y Auto and Manual
Output Power Control Y 10% / 25% / 50% / 75% / 100%
Distance Control bar & ACK timeout Setting N use KM instead of numbers
RSSI Indicator N CB/ CR/ Repeater Mode
Signal Strength N CB/ CR/ Repeater
WiFi QoS Y WMM
Power Saving Y Wireless LAN power saving
Multiple BSSID (Multi AP)

 

Y 4 BSSID for 2.4Ghz
N 4 BSSID for 5Ghz
Y Each BSSID should has its own WiFi & security settings
WPS Y WPS : Enable / Disable

Wi-Fi Protected Setup Information

– WPS Current Status:  unConfigured

– Self Pin Code:

– SSID:

– Authentication Mode:   Disable

– Passphrase Key:

– WPS Via Push Button:

– WPS via PIN:

Security WEP Y WEP(64/128bit)
WPA/ WPA2 Y WPA-PSK(Personal),WPA2-PSK(Personal),WPA/WPA2-PSK(Personal), WPA-EAP(Enterprise),

WPA2-EAP(Enterprise),WPA/WPA2-EAP(Enterprise)

TKIP/ AES Y TKIP / AES
Hidden ESSID Y  
MAC address filtering Y MAC address filtering (Both in WLAN and LAN), up to 50 field
L2 Isolation Y  
Desired / Preferred SSID

BSSID Support

Y Profile item can be arranged for preference

Profile on the top represents higher preference

User is allowed to move profile UP/Down

Site Survey Y Scan current AP, display information:

SSID, MAC, Channel, Security, Signal, Mode (Infra/Adhoc)

Allow to add to AP profile (preferred SSID)

Channel Bandwidth Selection Y N Mode: 20,. 40, Auto
Y B/G Mode: 10, 20, Auto
Technical Specifications
Hardware Specifications
Memory 32MB SDRAM (16 + 16; enhanced performance)
Flash 4MB
Physical Interface WAN: One 10/100/1000 Fast Ethernet RJ-45
LAN: Four 10/100/1000 Fast Ethernet RJ-45
Rest button
Power Jack
WPS (WiFi Protected Setup)
LEDs Status Power Status
WAN (Internet connection)
LAN1~LAN4
WLAN(Wireless connection)
Power Requirements Power Supply: 200 to 240 VDC ± 10% (ETSI) 100 to 120 VDC ± 10% (FCC)
Device: 12V/1A

Top Panel (LED status)
WAN 1 ( Link-> blue on, traffic->blink)
LAN 4 ( Link-> blue on, traffic->blink)
WLAN 1 ( Link-> blue on, traffic->blink)
Power/Status 1 ( On-> red Test/reset default->blink)

Environment & Physical
Temperature Range 0 to 45° C – Operating,  -10 to 70 ° C – Storage
Humidity (non-condensing) 15%~95% typical
Dimensions Housing   170mm (L) x 111mm (W) x 26mm (H)

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “EnGenius, 300Mbps Wireless N Router/AP/Repeater with Gigabit Switch, ESR9850”

There are no reviews yet.