EnGenius, 300Mbps Wireless N Router/AP/Repeater with Gigabit Switch, ESR9850 | NewEtrend.com
, , ,

EnGenius, 300Mbps Wireless N Router/AP/Repeater with Gigabit Switch, ESR9850

Availability:

3 in stock


Compare
  • Wireless 802.11n Technology – The most advanced wireless networking technology for the best range and speed.
  • Gigabit Ethernet Switch – Eliminates bottlenecks between wired and wireless devices and provides super-fast connectivity between wired devices.
  • SmartNAT – Ensures high performance when using P2P applications.
  • Multiple SSID – Allows media streaming to be segmented from regular data networking; Create a separate SSID for Guest Access.
  • Range Expander Feature – Extends the range of Wi-Fi networks.

ESR9850 is a 2T2R Wireless 11N Gigabit Router that delivers up to 6x faster speeds and 3x extended coverage than 802.11g devices. ESR9850 supports home network with superior throughput and performance and unparalleled wireless range. With easy to use on the WPS function, it helps users to connect to wireless device with just one push button.

There’s also a built-in 4-port full-duplex 10/100/1000/1000 Fast Switch to connect your wired-Ethernet devices together. The Router function ties it all together and lets your whole network shares a high-speed cable or DSL Internet connection.

Weight0.59 lbs
Dimensions170 × 111 × 26 in
brand

EnGenius

Brand: EnGenius

Software Features 
SystemSystem OS: Linux OS

System boot up time is <= 45 Sec

UtilityEasy Setup Wizard
Router User Interface

 

Access methodWeb Based (HTTP 1.0 / 1.1)
BrowserCompatibilityMicrosoft Internet Explorer 5.5/6/7 , Safari Ver1.2,Firefox 2.0 or later
Status

 

System StatusSystem InformationSystem Up Time, Device Name, Wireless MAC, LAN MAC, Country, Current Time, Firmware Version, Management VLAN ID
Current IP SettingIP Address, Subnet Mack, Default Gateway, DHCP
Current Wireless SettingOperation mode, Wireless Mode, Channel/ Frequency, L2 Isolation, MSSID Setting

2.4Ghz TX/RX: packet counts & traffics in Kbytes

Client ListList current associated clients.

Show only authorized and associated clients

– SSID

– MAC address

– Channel

– Security Type

– Mode (Infrastructure / Ad-hoc)

– Traffic in Kbytes

System Logdisplays a list of events that are triggered on the Ethernet and Wireless interface. This log can be referred to when an unknown error occurs on the system or when a report needs to be sent to the technical support department for debugging purposes

Wireless Functional List
Wireless Radio On/Off buttonYSoftware button / Disable or Enable WiFi radio
Operation modeYAP
YRouter
YWDS AP
NWDS Bridge
NCB (2.5 NAT)
YRepeater
Switch of 802.11 modesYB/G/N
Channel settingYManual
YAuto / Best Channel Selection
Transfer rate settingYAuto and Manual
Output Power ControlY10% / 25% / 50% / 75% / 100%
Distance Control bar & ACK timeout SettingNuse KM instead of numbers
RSSI IndicatorNCB/ CR/ Repeater Mode
Signal StrengthNCB/ CR/ Repeater
WiFi QoSYWMM
Power SavingYWireless LAN power saving
Multiple BSSID (Multi AP)

 

Y4 BSSID for 2.4Ghz
N4 BSSID for 5Ghz
YEach BSSID should has its own WiFi & security settings
WPSYWPS : Enable / Disable

Wi-Fi Protected Setup Information

– WPS Current Status:  unConfigured

– Self Pin Code:

– SSID:

– Authentication Mode:   Disable

– Passphrase Key:

– WPS Via Push Button:

– WPS via PIN:

SecurityWEPYWEP(64/128bit)
WPA/ WPA2YWPA-PSK(Personal),WPA2-PSK(Personal),WPA/WPA2-PSK(Personal), WPA-EAP(Enterprise),

WPA2-EAP(Enterprise),WPA/WPA2-EAP(Enterprise)

TKIP/ AESYTKIP / AES
Hidden ESSIDY 
MAC address filteringYMAC address filtering (Both in WLAN and LAN), up to 50 field
L2 IsolationY 
Desired / Preferred SSID

BSSID Support

YProfile item can be arranged for preference

Profile on the top represents higher preference

User is allowed to move profile UP/Down

Site SurveyYScan current AP, display information:

SSID, MAC, Channel, Security, Signal, Mode (Infra/Adhoc)

Allow to add to AP profile (preferred SSID)

Channel Bandwidth SelectionYN Mode: 20,. 40, Auto
YB/G Mode: 10, 20, Auto
Technical Specifications
Hardware Specifications
Memory32MB SDRAM (16 + 16; enhanced performance)
Flash4MB
Physical InterfaceWAN: One 10/100/1000 Fast Ethernet RJ-45
LAN: Four 10/100/1000 Fast Ethernet RJ-45
Rest button
Power Jack
WPS (WiFi Protected Setup)
LEDs StatusPower Status
WAN (Internet connection)
LAN1~LAN4
WLAN(Wireless connection)
Power RequirementsPower Supply: 200 to 240 VDC ± 10% (ETSI) 100 to 120 VDC ± 10% (FCC)
Device: 12V/1A

Top Panel (LED status)
WAN1 ( Link-> blue on, traffic->blink)
LAN4 ( Link-> blue on, traffic->blink)
WLAN1 ( Link-> blue on, traffic->blink)
Power/Status1 ( On-> red Test/reset default->blink)

Environment & Physical
Temperature Range0 to 45° C – Operating,  -10 to 70 ° C – Storage
Humidity (non-condensing)15%~95% typical
DimensionsHousing   170mm (L) x 111mm (W) x 26mm (H)

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “EnGenius, 300Mbps Wireless N Router/AP/Repeater with Gigabit Switch, ESR9850”

There are no reviews yet.