, , , ,

D-Link, 8-port 1000Base-T Easy Smart gigabit Switch with 2 combo 100/1000Base-T/SFP ports, IPv6 support, MetroEthernet switch, DGS-1100-10


1 in stock

  • 8-port 10/100 / 1000BASE-T
  • 2 combo port 100/1000 Base-T / SFP
  • Level 2 functions
  • Multicast Layer 2
  • VLAN

AED385.94 AED410.88

1 in stock

Configurable Switch DGS-1100-10 / ME is equipped with 8-port 10/100 / 1000Base-T and 2 combo ports and is designed for network deployment Metro Ethernet. DGS-1100-10 / ME is made in a durable and safe housing and supports Multicast for IPTV-applications. Ethernet-ports are equipped with built-in protection against static electricity to 6 kV. Optical SFP ports provides an opportunity to build a network FTTx.
DGS-1100-10 / ME provides an opportunity to work with IPTV-service, or any other, based on the transmission of multicast traffic, enjoys a growing demand in the market, thanks to the support functions such as IGMP Snooping, Limited IP Multicast (Restriction of multicast on IP-addresses) , ISM VLAN and MLD Snooping. Using these functions, enables optimum bandwidth while preserving a high quality of data transmission. Limited IP Multicast function allows you to create profiles multicast and link them to ports or port ranges to allow or deny requests to connect to a particular group (channel) that are sent to users. Using profiles simplifies the management of IPTV service in case the user changes the package. When using the ISM VLAN (IGMP Snooping Multicast VLAN) multicast traffic for the purpose of efficient spending bandwidth transmitted in a separate VLAN. When using the ISM VLAN (IGMP Snooping Multicast VLAN) configuration is necessary on the access switch, and the L3 switch level of aggregation. Bandwidth savings achieved in the case of viewing the same channel in different customer VLAN, it does not require a separate copy of the multicast traffic for each of them in the case of using the ISM VLAN. MLD Snooping function improves the efficiency of multicast and can reduce costs during the transition to IPv6.
DGS-1100-10 / ME also supports security features. Through the use of Static MAC mechanism can allow access only to authorized devices. Port Security allows you to limit the number of MAC-addresses, studied at the port, and prevent flood-attacks against overflow switching table.
High performance and fault tolerance
Switch DGS-1100-10 / ME supports a wide range of functions to ensure smooth operation and simplifies management. Support Loopback Detection prevents the formation of loops in the network. DGS-1100-10 / ME also supports QoS (Quality of Service).Packets may be classified based on the contents and distribute a different priority queue processing. Prioritization mechanism helps to differentiate traffic based on quality of service requirements. With Bandwidth Control allows network administrators to define bandwidth for each port in increments of 16 kbit / s for incoming and outgoing traffic. The switches also support the functional protection from the storm (Storm Control), which allows you to get rid of unnecessary traffic.
DGS-1100-10 / ME supports 802.1x authentication on the port-based / node, and authentication based on the local database or RADIUS-server. Administrators can also put unauthorized users in Guest VLAN and assign them limited access rights.
Configuring the Switch can be performed via Telnet, SNMP and HTTP. Convenient Web-based interface for easy management.Protocol LLDP (Link Layer Discovery Protocol) enables a network equipment on the LAN to notify its existence and characteristics, so in accordance with the result of the search can be easily applied to the detected device configuration and topology of a graphical image.
Switch DGS-1100-10 / ME allows administrators to perform a quick diagnosis, and troubleshooting. The diagnostic function allows you to determine the length of cable connected and display information about its status. Support for this function provides a convenient troubleshooting. In addition, DGS-1100-10 / ME supports IEEE802.3ah, link layer protocol, allows administrators to monitor the status of the network and rapid fault detection on the switch ports.

Number of Ports
• 8-port 10/100 / 1000BASE-T
• 2 combo port 100/1000 Base-T / SFP
• IEEE 802.3
• IEEE 802.3u
• IEEE 802.3ab
• IEEE 802.3x Flow Control
• IEEE 802.3az
• Switching Matrix: 20 Gbit / s
• Speed ??forwarding 64-byte packets: 14,88 Mpps
• Size of MAC address table: 8 K
• DRAM for CPU: 128 MB
• packet buffer: 4.1 MB
• Flash-Memory: 16 MB
• Jumbo-frames: Up to 10 Kbytes
• Power (per device)
• Link / Activity / Speed ??(per port)
Power consumption
• Standby: 3.4 W
• Maximum power consumption: 7.9 W
The software features
Level 2 functions
• MAC-address table: 8K
• 802.3x Flow Control
+ HOL Blocking Prevention
• Loopback Detection is
• Port Mirroring
+ Support 4 groups
+ One-to-One
+ Many-to-One
Multicast Layer 2
• IGMP Snooping
+ IGMP v1 / v2 Snooping, v3 Awareness
+ Supports 256 groups
+ IGMP Snooping Fast Leave-based port
• Authentication IGMP
+ MLD Snooping
+ MLD Snooping v1, v2
+ Support groups 256 MLD Snooping (shared with IGMP Snooping)
+ MLD Snooping Fast Leave-based site
+ Limited IP Multicast (Restriction of multicast on IP-addresses)
• 802.1Q Tagged VLAN
• VLAN Group
+ Support for 32 static VLAN groups
• Management VLAN
• VLAN-based port
• Double VLAN (Q-in-Q)
+ Q-in-Q port-based
Quality of Service (QoS)
• 8 queues per port
• Processing Queue
+ Strict Priority
+ Weighted Round Robin (WRR)
• Bandwidth Management
+ Based on the port (incoming / outgoing, with a minimum of 16 kbit / s)
• CoS based on:
+ 802.1p
• Port Security
+ Up to 64 MAC addresses per port
• Segmentation of traffic
• Protection from the broadcast / multicast / unicast storm
• D-Link Safeguard Engine
• 802.1X
+ Based Access Control port
+ Based access control node
• Guest VLAN
• Support local database / RADIUS-server
• Support for RADIUS Accounting
• 3 levels of user access rights
• The diagnostic cable
• 802.3ah
• Web-interface
• Command Line Interface (CLI)
• Telnet-server
• TFTP-client
• SNMP v1 / v2c / v3
• SNMP Traps
• System Log
• RMON v1
+ Support groups 1,2,3,9
• DHCP-client
• DHCP automatically
• DHCP Relay for IPv4 / IPv6
• DHCP Relay Option 82
• DHCP Relay Option 37
• Tagging PPPoE Circult-ID
• View CPU utilization
• Encrypt passwords
• RFC1213 MIB II
• RFC1493 Bridge MIB
• RFC1907 SNMPv2 MIB
• RFC1398, 1643, 1650, 2358, 2665 Ether-like MIB
• RFC 2233, 2863 IF MIB
• RFC 2618 RADIUS Authentication Client MIB
• RFC2620 RADIUS Accounting Client MIB
• Private MIB
IETF standard
• RFC768 UDP
• RFC791 IP
• RFC792,2463, 4443 ICMPv4
• RFC793 TCP
• RFC826 ARP
• RFC 2474, 3260 Definition of the DS Field in the IPv4 and IPv6 Header
• RFC 1321, 2284, 2865, 3580, 3748 Extensible Authentication Protocol (EAP)
• RFC2571, RFC2572, RFC2573, RFC2574 SNMP
• RFC1981, RFC2460, RFC2461, 4861, RFC2462, 4862, RFC2464, RFC3513, 4291, RFC2893, 4213


Power supply
External adapter that runs on a network 100-240V, 50-60Hz with an output of 12V / 1A
190 x 120 x 38 mm
Noise level
0 dB
Heat release
26,97 BTU / hr
0.63 kg
Ventilation system
Working temperature
-5 To 50 ° C
Storage temperature
-40 To 70 C
Working Humidity
From 10% to 90%
CE Class B, FCC Class B, VCCI, BSMI

Based on 0 reviews

0.0 overall

Be the first to review “D-Link, 8-port 1000Base-T Easy Smart gigabit Switch with 2 combo 100/1000Base-T/SFP ports, IPv6 support, MetroEthernet switch, DGS-1100-10”

There are no reviews yet.

You may also like…

Open chat
Hello 👋😊 How can we help?